HLJ SVS-1 是專為音響設備所開發的高性能隔振音響架，以「隔震、抑震、抗震」為核心設計理念。

SVS-1（Suppressing Vibration Stand）透過承板、彈簧及阻尼結構所形成的隔振系統，降低外部環境與設備運作所產生的振動傳遞，讓音響器材與承載結構之間形成有效的振動隔離。

與一般僅以承重及結構穩定為主要目的的音響架不同，SVS-1 將「振動控制」納入音響架本身的設計，使音響設備在穩定的承載環境下運作。

其設計理念並非透過材料本身的聲音特性來改變音色，而是降低不必要的振動干擾，讓音響設備更接近原有的聲音表現。

SVS-1 適合搭配擴大機、串流播放器、CD 播放器、DAC、唱盤及其他音響設備使用。透過隔振結構，可降低設備與地面、音響架之間的振動相互傳遞，進一步提升系統的穩定性與音樂重播表現。

SVS-1，不只是承載音響設備的架子，而是音響系統中的振動控制平台。

The HLJ SVS-1 is a high-performance audio rack specifically developed for audio equipment, based on three core principles: vibration isolation, vibration suppression, and anti-vibration control.

SVS-1, short for Suppressing Vibration Stand, incorporates a vibration isolation system consisting of the equipment support platform, springs, and damping structures. This design helps reduce the transmission of vibrations generated by both the surrounding environment and the equipment itself, creating an effective vibration-isolated interface between the audio equipment and its supporting structure.

Unlike conventional audio racks designed primarily for load-bearing capacity and structural stability, the SVS-1 incorporates vibration control directly into the rack itself, providing audio equipment with a more stable operating platform.

Rather than using the sonic characteristics of specific materials to alter the tonal balance, the SVS-1 is designed to reduce unwanted vibration interference and allow audio equipment to perform closer to its original sonic character.

The SVS-1 is suitable for amplifiers, network streamers, CD players, DACs, turntables, and other audio components. By reducing vibration transmission between the equipment, rack, and floor, it helps create a more stable foundation for high-quality music reproduction.

The SVS-1 is more than an audio rack—it is a vibration control platform for the audio system.

拆開包裝後開始安裝

安裝10cm的實心白鐵角柱



有設定安裝固定位置



放置固定點腳座




底層安裝完成



再來安裝第二層29cm實心白鐵



堆疊上第一層的四個支撐點就安裝完成囉!!








外型尺寸

以上為標準長寬高尺寸

角柱分別有10cm、18cm及27cm三種規格
外型尺寸及材料皆可訂製
頂部板層四角有8mm的插銷，可另外搭配大理石(需另購)

安裝相關資訊

承種範圍建議
15~50kg隔震效率值85%以上
5~15kg隔震效率值70%~80%左右
5kg以下隔震效率值20~50%左右
最大承重範圍70kg
層架底層有四個調整孔需使用六腳板手調整水平